Skip to main content
Chat icon Chat with us live

Safety in...


Warehouses

Warehouses can be hazardous places. The following details highlight some of the hazards and risks that may exist in your warehouse and the steps you can take to prevent accidents. This list can be used as a starting point in assisting you to complete a risk assessment.

Storage and Racking

Incorrectly stacked goods may fall injuring staff below. Overloading may lead shelves/racks to collapse. Unsafe methods of stacking or retrieval of goods may lead to falls.

Managing the risk:

  • Stack goods securely on shelves or racking, with the heaviest items at the bottom.
  • Ensure racking is capable of supporting the loads and is properly secured (e.g. bolted to the floor)
  • Ensure racking is maintained and is protected against mechanical damage from FLT's.
  • Regularly inspect pallets used for storage and remove damaged ones immediately.
  • Organise racking in aisles to allow for safe access to goods, movement of FLT's.
  • Train staff in methods of stacking and retrieval.
  • For manual access, provide proper safety ladders and inspect for damage regularly.
  • If using FLT's to access goods, ensure that goods are stacked and retrieved in pallets, or that safety cage is provided for hand picking. Never allow anyone to stand on the forks of a FLT.
  • Consider the use of safety footwear and hard hats.

Vehicular Movement

The movement of delivery vehicles and FLT's around warehouses accounts for a large proportion of accidents e.g. collision with people, collision with other vehicles and overturning of FLT's.

Managing the risk:

  • Try to separate vehicles and people e.g. by using clearly marked, well-planned traffic routes both indoors and externally.
  • Devise one-way traffic systems.
  • For vehicles likely to be reversing in close proximity to people fit warning lights and audible alarms.
  • Properly train and authorize all drivers.
  • Issue sufficient information and instruction to visiting drivers.
  • Restrict access to dangerous areas such as loading/unloading bays.
  • Ensure surfaces over which vehicles are driven are even.
  • Check vehicles regularly and ensure they are properly maintained.
  • Ensure FLT's are not overloaded (see safe working load)

Loading and Unloading

Accidents have occurred due to loading and unloading e.g. vehicles prematurely moving away from loading bays or areas causing FLT's or people to fall from the vehicle, badly designed or improperly used dock levellers and tail lifts, improperly loaded vehicles and unsafe methods for retrieval of goods.

Managing the risk:

  • Provide a safe loading and unloading area and train staff in safe procedures.
  • Devise a procedure to prevent premature movement of vehicles e.g. ask the driver to hand over keys until the operation is complete, or at larger premises with loading bays, use physical restraints and/or a traffic light system.
  • If dock levellers are used, ensure they are kept in the raised position when not in use and that they are fitted with skirt plates and toe guards to prevent trapping. Regularly check for damage and maintain in good condition.
  • Ensure tail lifts are designed to British Standards 6109 and 5304, that a competent person examines them annually and that the safe working load is not exceeded.
  • Goods should be securely packed and arranged so that they are safe for transport and unloading, e.g. shrink wrapped on pallets, in roller cages, etc.
  • If roller cages are used, ensure that the vehicles are level when loading or unloading, that they are fitted with brakes and handles and that they are not overloaded.
  • No vehicle should be loaded beyond it's rated capacity or beyond the legal limit of gross weight.

Manual Handling

There is a risk of back injury and muscular strains from lifting and moving heavy or bulky items of stock.

Managing the risk:

  • Assess all of the manual handling operations that your staff perform i.e. lifting, carrying, pushing and pulling.
  • Use mechanical devices where possible e.g. trolleys, pallet movers, FLT's, conveyors, scissor lifts,etc.
  • Train staff in safe lifting techniques.
  • Consider breaking up loads to make them more manageable or the use of two or more people for certain jobs.
  • Ensure aisles are of sufficient width and consider raising the height of any working platforms to reduce the need to bend or twist.

Slips, Trips and Falls

Uneven, slippery or obstructed floor surfaces, trailing cables and poor general housekeeping may lead to accidents.

Managing the risk:

  • Keep passageways, stairs and delivery areas clear.
  • Dispose of loose packaging and bindings properly.
  • Clean up spillages immediately and display warning notices.
  • Fasten cables securely to the floor or re-route overhead if possible.

Hazardous Substances

Certain items of stock (and some chemicals used for cleaning) may be classified as hazardous or highly flammable. Exposure to some of these chemicals through leaks or spillages could cause burns, dermatitis or could be harmful if inhaled.

Managing the risk:

  • Obtain information on the risks associated with all substances stored and used on the premises from the manufacturer's hazard data sheet.
  • Provide special storage conditions if necessary e.g. a fire resistant store or cabinet.
  • Inspect substances on delivery to ensure packaging is intact, devise safe handling procedures and store in original containers.
  • Devise a procedure for handling damaged containers and for cleaning up spillages.
  • Provide staff with training and if necessary, protective clothing (e.g. gloves)

Noise

FLT's, conveyers, compressors, etc used in some warehouses could give rise to potentially hazardous levels of noise.

Managing the risk:

  • If when people speaking normally have difficulty being heard clearly by someone who is about 2m away, then you should arrange for a noise assessment to be carried out.
  • If this assessment confirms that hazardous levels do exist, then you will need to reduce exposure by quietening machinery or by limiting the time spent by staff in noisy areas.
  • If ear protectors are necessary, ensure that audible warnings e.g. on FLT's can still be heard.

Fire Risks

Obstructed exit routes, e.g. by stock and/or accumulations of packaging can prevent escape and provide fuel for fires.

Managing the risk:

  • Clearly mark escape routes e.g. using painted lines and signs.
  • Keep all escape routes and fire exits clear and dispose of rubbish regularly.

Electricity

Accidents are mainly due to misuse of, or badly maintained equipment.

Managing the risk:

  • The electrical system and all equipment should be inspected regularly and properly maintained.
  • All electrical switchgear controlling machinery should be clearly labelled and readily accessible.

Cold Stores

Accidents arising form cold stores include: accidental locking in, over exposure to cold conditions, slips and falls due to ice build up and accidental release of refrigerant.

Managing the risk:

  • Ensure the refrigeration system is designed to BS 4434 and that it is properly maintained.
  • Only allow access to authorized persons.
  • Provide an emergency exit, capable of being opened from inside at all times, and a trapped man alarm.
  • Provide adequate protective clothing, e.g. thermal undergarments, socks, insulated suits/jackets, gloves and boots.
  • Allow staff to take regular breaks in a warm area.
  • Keep doors closed to minimize ice build up. Regularly check for, and remove, any ice.
  • Ensure persons required to work in very cold conditions do not suffer from a medical condition likely to be made worse by the temperatures (carry out a pre-employment medical check)
  • Devise a clear emergency procedure to be followed should refrigerant be accidentally released, which includes evacuation, rescue, first aid, plant isolation, etc.

Cookies on the Tameside MBC website

We'd like to use cookies to measure website usage, such as see our most popular pages. We also use some essential cookies on our website to save user settings.

View more information on the cookies we use.